How To Reset A Whirlpool Refrigerator [Quick Guide] (2023)

Our article details how to reset a Whirlpool refrigerator. If you have had problems finding out how to reset some parts of this refrigerator, we have divided the answers for you into different sections…

How To Reset A Whirlpool Refrigerator [Quick Guide] (1)

Table of Contents

Is There a Reset Button on a Whirlpool Refrigerator?

Some Whirlpool refrigerator models have buttons you can use to reset them. They are the refrigerator switches located inside the appliance.

Look close to the door and you find some switches; press and hold them until the display on the refrigerator goes blank and resumes normal functions. However, if your model does not have this button, disconnect it from electric power for about thirty minutes before reconnecting it.

How to Reset Your Whirlpool Refrigerator: Replace Filter Light

To reset the replace filter light of your Whirlpool refrigerator, take the following steps:

1. Press the options button. Doing this will pop up three options.

2. Select “Filter reset” from the options provided.

3. Hit the confirm button and wait. After three seconds, you will hear a beep indicating that a reset has been performed.

This video explains how to reset the ‘replace water filter’ light…

How to Reset a Whirlpool Refrigerator Ice Maker

To reset the ice maker of a Whirlpool refrigerator, take the following steps:

Step 1: Adjust the feeler of the ice maker to shut it off. You need to do this in order to cut off the water supply to the ice maker. It is safe and not messy.

Step 2: Remove the ice tray and look for the reset button on the bottom of the ice maker.

Step 3: Press and hold down the reset button for about 10 seconds. Let go of it if the ice maker begins turning again or if you hear a chime inside the unit.

Step 4: If your ice maker has no reset button, find the on/off switch on the ice maker and turn it to ‘off’. Then unplug the refrigerator and leave it unplugged for about 10 minutes.

Step 5: Plug the refrigerator back in and the switch will come back on. This resets the ice maker. Contact the Whirlpool Center for further assistance if necessary.

Check the instructions in the refrigerator’s user manual to determine how to reset the ice maker in that particular model.

Supco 8 Cube Ice Maker Replacement Kit for Whirlpool, Kenmore, KitchenAid, Part No. RIM597

  • MODULAR ICE MAKER - This Supco modular ice maker unit is an excellent replacement for in the door ice makers including units 626663 (Whirlpool), 2198678 (Whirlpool), and 2198597 (Whirlpo

Prices pulled from the Amazon Product Advertising API on:

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.

How to Reset Defrost Timer on a Whirlpool Refrigerator

To reset the defrost timer in this unit, go to the back panel of the refrigerator and unscrew it. Disconnect the unit from the power outlet. Find the round notch on the defrost timer, and turn it anti-clockwise with a screwdriver with a flat head.

Keep turning it until you hear the fan of the refrigerator stop. This shows that the defrost timer has been reset.

How to Reset a Whirlpool Refrigerator Control Board

To reset the control board of this unit, open the door of the refrigerator and locate the door switches. Press both the switches and the refrigerator temperature button up to three times in ten seconds.

Release the switches and button, and you will see the letter ‘s’ displayed on the panel of the freezer section. The letter ‘e’ will be displayed in the fridge section.

Press the temp button of the fridge once. Some numbers will show on the display, with ‘1’ showing on the display of the freezer section. Then, if the display of the fridge goes blank while the freezer shows ‘1’, the control board has been reset.

Need expert help? Use the chat box on this page to speak with a verified appliance technician right away. No need for expensive in-home service calls. No appointments. No waiting.

Whirlpool Refrigerator Control Panel Reset

To reset the control panel on your Whirlpool refrigerator, unplug the appliance from the wall outlet. Alternatively, tun off the circuit breaker hat controls the refrigerator. Leave the appliance off for about ten minutes before reconnecting it to electric power.

This gives the control board and control panel time to reset fully. Check the cooling function to ensure it is on before testing the control panel. It should resume normal operation after this reset. You may also want to check the Control Lock on the panel to see if it is active, especially if the control panel does not work after the reset.

If the lock is active, you cannot use the control panel and dispenser, although the lights may be on at this point. The lock icon or button may be illuminated if it is active, so press it or about three seconds or util the light goes off. Then, try the control panel again.

How Do I Reset My Whirlpool Freezer?

To reset your Whirlpool freezer, disconnect the appliance from electric power; power down the circuit breaker or unplug the refrigerator from the wall outlet. Leave it off for about five to ten minutes and turn it on again. Check the freezer’s control panel to ensure it is working and the cooling function is active after the reset.

How to Reset a Whirlpool Refrigerator – Specific Models

The following are steps to reset different parts of a Whirlpool Gold refrigerator:

How to Reset Control Panel on a Whirlpool Gold Refrigerator

To reset the control panel on a Whirlpool Gold refrigerator, take the following steps:

1. Turn off the circuit breaker or unplug the fridge for 5-10 minutes.

2. Power the fridge by turning on the circuit breaker or plugging the fridge back in.

3. Turn on the cooling function.

4. Check the functionality of the control panel.

How to Reset Ice Maker on a Whirlpool Gold Refrigerator

To reset the ice maker on this unit, find the ice tray and remove it. After the removal, you should see a bright RED reset button on the bottom of the ice maker. Push this button and hold it for 10 seconds.

Note: Always get the help of a professional technician if you find the fault too difficult to handle alone. Attempting to repair your refrigerator by yourself could lead to more problems.

Check out these guides on resetting other refrigerator brands…

How to Reset an Amana Refrigerator [In Minutes]

How to Reset Fisher and Paykel Refrigerator [In Minutes]

How to Reset a Magic Chef Fridge [In Minutes]

How to Reset a Norcold Refrigerator [Quick Fix]

How to Reset a Kenwood Fridge Freezer [Quick Fix]

How to Reset a Jenn Air Fridge [In Minutes]

How to Reset a Westinghouse Fridge [Quick Fix]

How to Reset a Whirlpool Refrigerator – Related FAQs

1. Can You Reset a Whirlpool Refrigerator by Unplugging It?

You can reset a refrigerator just by unplugging it. To do this, unplug the device from the wall for 30 to 45 minutes, then turn it back on. This will reset the device and, in some cases, might be enough to fix any problem completely.

In principle, all devices can be turned on or off, but the refrigerator cannot be turned off easily.

2. How Do I Reset My Whirlpool Water Dispenser?

You can reset your Whirlpool water dispenser by pressing and holding the “Water filter” button for three seconds. When the device has been reset, the water filter icon automatically returns to the initial blue color, and you will stop seeing the “Replace Filter” prompt on the display screen.

3. How Do I Reset My Whirlpool Refrigerator after a Power Outage?

To reset your unit after a power outage, press and hold the Power Lock and Filter buttons simultaneously for five seconds. Doing this will turn on the cooling feature of the refrigerator. Alternatively, turn off the refrigerator by unplugging it from the wall outlet or turning off the circuit breaker.

Leave it off for a few minutes, between five and ten minutes, to give the compressor and control board time to reset. Afterward, turn the refrigerator on again and ensure the cooling function is active. The refrigerator should resume normal functions after the reset. Otherwise, consult the user manual or contact Whirlpool to schedule service.

4. How to Reset a Whirlpool Refrigerator

To reset a Whirlpool refrigerator, take the following steps:

1. Open the refrigerator door and search for the switches adjoined to it.

2. Press the switches and the temperature button simultaneously up to three times in 10 seconds. This should reset your refrigerator and freezer.

To find out if the reset was successful, check to see if there is a letter “S” displayed on the freezer section when you release the switches. There should also be a letter “E” on the fridge’s display to indicate that the reset has been performed.

On some other models, the display on the control panel should go blank and resume normal functions within a few seconds. You may also try using the freezer door switch; press and hold it until the freezer stops and starts. Consult the refrigerator user manual for specific instructions on resetting the refrigerator by model.

Get Instant Help — Ask An Experienced Verified Appliance Technician

Need expert help? Click here to use the chat box on this page to speak with a verified appliance technician right away. No need for expensive in-home service calls. No appointments. No waiting.

Top Articles
Latest Posts
Article information

Author: Frankie Dare

Last Updated: 09/04/2022

Views: 5593

Rating: 4.2 / 5 (53 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Frankie Dare

Birthday: 2000-01-27

Address: Suite 313 45115 Caridad Freeway, Port Barabaraville, MS 66713

Phone: +3769542039359

Job: Sales Manager

Hobby: Baton twirling, Stand-up comedy, Leather crafting, Rugby, tabletop games, Jigsaw puzzles, Air sports

Introduction: My name is Frankie Dare, I am a funny, beautiful, proud, fair, pleasant, cheerful, enthusiastic person who loves writing and wants to share my knowledge and understanding with you.